Summary: Settings are ported to QtQuickControls 2 and now use a Kirigami Form Layout.
Test Plan:
Before:
{F6633459}
After:
{F6633461}
Reviewers: #vdg, #plasma, ngraham, davidedmundson
Reviewed By: #vdg, #plasma, ngraham, davidedmundson
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D19289
Summary:
When at least two removable devices are mounted, a button shows
up that will allow to unmount all mounted removable devices.
This is convenient for removable drives with several partitions,
each of which have to be unmounted to be able to safely plug the
device out.
{F6330009}
FEATURE: 395644
Test Plan:
Plug and mount two devices.
Click on the new 'unmount all' button.
Reviewers: #plasma, #vdg, ngraham, broulik
Reviewed By: #plasma, #vdg, ngraham, broulik
Subscribers: abetts, broulik, ngraham, plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D16212
Summary:
This patch fixes two issues:
- the 'state' of the device now propagates correctly, that makes the busy indicator be displayed again, device emblems are also updated correctly
- there is no more delay between the moment when the device is actually mounted and the moment the device notifier says it is. The worst case used to be 5 seconds.
BUG: 354321
BUG: 399986
Reviewers: #plasma, #vdg, broulik, bruns, ngraham, davidedmundson
Reviewed By: #plasma, #vdg, ngraham, davidedmundson
Subscribers: mart, cfeck, ngraham, plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D16170
Summary:
When unmounting a device, the device notifier keeps the information
of the device and its icon for a few seconds before it disappears.
But the binding on the label and the icon was making them go blank
before, leaving an emblem without an icon and a 'This device can
now be safely removed' notice without the name of the device
(although it did not always happen, this I am not sure why).
The problem appeared with commit 61b2b173e8
Test Plan:
Unmount a removable device with the device notifier: for a few
seconds, the device name and icon should still be displayed
An example of the problem:
{F6442095}
Reviewers: #plasma, davidedmundson
Reviewed By: #plasma, davidedmundson
Subscribers: davidedmundson, filipf, plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D17127
Summary:
In the specific case of having the device notifier opened
and inserting a device that has been configured to be
automatically mounted, the transition animation could be
interrupted resulting in the opacity being wrong.
Test Plan:
In the setup discribed in the summary, you should never
see something like the attached screenshot where the list
of action opacity is not 1.
{F6460038}
See http://doc.qt.io/qt-5/qml-qtquick-viewtransition.html#handling-interrupted-animations
for more information.
Reviewers: #plasma, #vdg, ngraham, davidedmundson
Reviewed By: #plasma, #vdg, ngraham, davidedmundson
Subscribers: broulik, davidedmundson, ngraham, plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D17394
Summary:
When unmounting a removable device from dolphin, the device notifier
will popup saying the device can now be safely removed. But the popup
never auto-hides.
Test Plan:
Plug a USB pen drive
Unmount it from dolpin
Device notifier should popup and hide itself after 3 seconds
Reviewers: #plasma, #vdg, broulik
Reviewed By: #plasma, broulik
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D16045
Summary:
When a Solid device is removed (e.g. a CD is ejected) the notifier tries
to read the attributes although the Source for the UDI has just vanished.
Fixes several QML error messages, i.e. "TypeError: Cannot read property
'...' of undefined" and "Unable to assign [undefined] to QString".
Apparently these errors also have the effect of items showing outdated
state, i.e. optical media still being shown after ejecting it.
CCBUG: 394348
Test Plan:
1. insert optical medium
2. eject
Without the changes, the item was stuck
Now, the item is removed as soon as the medium is ejected
Also, no more errors are logged for the devicenotifier
Reviewers: #frameworks, broulik
Reviewed By: broulik
Subscribers: ngraham, plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D15687
This reverts commit e37156b404.
Concept is fine, but currently we have severe CMake issues as well
as a major containment loading bug.
When re-reverting we need to be sure to test with clean install prefixes.
CC: plasma-devel@kde.org
Summary: use the new install macro which compresses packages in a bundled rcc
Test Plan: tried to load and use every single plasmoids
Reviewers: #plasma, davidedmundson
Reviewed By: #plasma, davidedmundson
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D11514
Summary:
when the device notifier pops up automatically, leave it open
if there is no user activity, if there is any, close after around
3 seconds. Suspend the countdown if the notifier window either has
focus or the mouse cursor is over it, leaving the user the time to
go interact. if it doesn't have focus and the mouse leaves, resume
the countdown
replaces D10591
Test Plan:
tested for a while in a real world usage, it behaves in a fairly natural
way
Reviewers: #plasma, broulik
Reviewed By: #plasma, broulik
Subscribers: ngraham, plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10921
In QtQuick Layouts implicit size (set by IconItem to the SVG's natural size) takes
precedence over width/height. This was fixed in DeviceItem but forgotten here.
BUG: 382541
FIXED-IN: 5.8.8
Summary:
The license key is specified as GPL, while the actual code (I checked)
in all these cases is licensed under GPL version 2 or later. This commit
fixes the metadata.desktop files to reflect the actual license.
Test Plan: Manually checked, also compared to the keys looked for in kaboutdata.cpp
Reviewers: #plasma, sitter, davidedmundson
Reviewed By: #plasma, davidedmundson
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D6627
Summary:
anchor the layouts of config dialogs to left
this way they will look the same normally (they
are positioned at x 0 normally) but will be
anchored to right instead if layout mirroring is enabled
CCBUG:372721
Test Plan: opened all config dialogs both in ltr and ltr layouts
Reviewers: #plasma, davidedmundson
Reviewed By: #plasma, davidedmundson
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D3456
Summary:
anchor the layouts of config dialogs to left
this way they will look the same normally (they
are positioned at x 0 normally) but will be
anchored to right instead if layout mirroring is enabled
CCBUG:372721
Test Plan: opened all config dialogs both in ltr and ltr layouts
Reviewers: #plasma, davidedmundson
Reviewed By: #plasma, davidedmundson
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D3456
When a device notification arrives, such as "you can now safely unmount" or "failed to unmount"
device notifier would unconditionally open showing an empty list.
Since we now show device notifications only connected to the device they're about, it makes no
sense to expand it for invisible devices. Applications where mounting or unmounting can fail
for non-removable devices, like Dolphin, already show the error message within the UI anyway,
making the popup redundant.
BUG: 368894
FIXED-IN: 5.8.0
Differential Revision: https://phabricator.kde.org/D2823
Device auto-mounting is quite related to the device notifier and we used to have
that in Plasma 4 but lost this setting there as we cannot embed widget UIs into
plasmoid configuration dialogs.
BUG: 364977
FIXED-IN: 5.8.0
Differential revision: https://phabricator.kde.org/D2060
Instead of having a bunch of handlers in various places messing with various settings,
try to use declarative bindings where possible.
* Remove separate passive timer, instead re-use the pendingDelegateRemoval property
which has its own timer. This way, when a device is unmounted, device notifier stays
active until the notification has cleared, however, when the device is yanked out manually,
it disappears right away
* Don't break binding on Plasmoid.active to ensure its state is always proper depending on
whether a device or not is present (the linked bug)
* Create tooltip declaratively rather than imperatively
BUG: 362992
FIXED-IN: 5.7.0
Differential Revision: https://phabricator.kde.org/D1793
l10n daemon script
Laurent Montel
Filip Fila
Thomas Surrel
Stefan Brüns
Yuri Chornoivan
David Edmundson
Marco Martin
Jonathan Riddell
Kai Uwe Broulik
Sebastian Kügler
andreas kainz