Summary:
When triggering a move resize all following pointer events are grabbed
by KWin itself. Thus the correct behavior is to informe the client about
it and send a pointer leave.
This ensures that after the move resize ended the pointer gets a new
enter. By sending anew pointer enter the position gets updated to the
new position which so far did not happen and the client generated events
on the wrong position.
BUG: 371573
FIXED-IN: 5.8.3
Reviewers: #kwin, #plasma_on_wayland, broulik
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3154
The first test case was sometimes failing due to the time value in the
first render pass being too high. So that the effect ended directly for
the window.
This change adds a small waiting time for the compositor to render prior
to the creation of the window. Ideally we would connect to frameRendered
signal, but the OpenGL compositor doesn't emit it yet.
Test more combinations of other effects together with sliding popups.
The problem does not only exist for scale in but for pretty much any
effect that the ordering in which the effects get loaded makes the test
pass or fail.
Some effects require OpenGL, as build.kde.org does not support OpenGL
compositing (yet), the tests only do the OpenGL cases if an OpenGL
compositor could be created.
CCBUG: 336866
The test case loads the sliding popups effect and the scale in effect
which also operates on added windows. As the test case shows depending
on the sequence how the effects are loaded, the window gets animated by
both effects (wrong) oor only sliding popups.
CCBUG: 336866
Summary:
registerShortcut is available to javascript KWin scripts but was not
available to those written in declarative script.
BUG: 340225
FIXED-IN: 5.8.4
REVIEW: 129250
Summary:
It can happen that startAnimation is invoked multiple times for a
window. In case it was invoked a second time the previous animation was
not cancelled. This resulted in the set-animation to never end. When
closing a window, it would stay around as a translucent, non-interactive
window zombie.
This change ensures that existing animations get cancelled.
BUG: 342716
FIXED-IN: 5.8.3
Test Plan: Tested through autotest and manually.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3190
Summary:
When the decoration size changes the textures get recreated and need to
be properly filled. So far KWin used the scheduled repaint geometry in
this situation. If the decoration didn't schedule the complete geometry
for repain there will be an empty area in the decoration texture.
This change ensures that the complete texture gets repainted when they
are recreated. Thus the decoration rendering is more fault tolerant
towards potential bugs in the decoration. With no-compositing and XRender
compositing this problem was not reproducable and already fault tolerant,
so OpenGL just catches up with the other modes.
BUG: 371735
FIXED-IN: 5.8.3
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3186
Summary:
Client::updateInputWindow operates with the decoration size. The method
gets called from various points when changing the window geometry. If at
that moment the decoration has not updated yet, the borders might be at
a wrong position.
This behavior could be triggered when a window requested to change the
state to maximized. During maximization the decoration still had the
wrong size when updateInputWindow was called, thus an interactive area
inside the window was created.
To circumvent this problem updateInputWindow is now also called whenever
the window decoration changes.
As a note: that a maximized window has resize only borders is wrong. Kwin
should be protected against that.
BUG: 371284
FIXED-IN: 5.8.3
Test Plan: Checked xwininfo for the deco extends window
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3151
This test case simulates a condition of the translucency effect
modifying windows of certain types (e.g. dialogs).
In case the effect got activated for a window it does not end after the
window gets closed and creates a non-interactive zombie window.
CCBUG: 342716
On build.kde.org the autotests started to crash on tear down due to a
newer Wayland library. The reason is that the KWayland::Client::Outputs
are destroyed after the internal Wayland connection is destroyed.
This change parents the created Outputs to the Registry like the other
objects. To ensure that the KWin::QPA::Screen doesn't have a problem
with that, it is changed to a QPointer - nullptr checks are already in
place.
Hopefully that will fix the crashes on build.kde.org, but there is a
chance that more errors are hidden.
Summary:
With nouveau driver it can happen that KWin gets frozen when first trying
to render with OpenGL. This results in a freeze of the complete desktop
as the compositor is non functional.
Our OpenGL breakage detection is only able to detect crashes, but not
freezes. This change improves it by also added a freeze protection.
In the PreInit stage a thread is started with a QTimer of 15 sec. If the
timer fires, qFatal is triggered to terminate KWin. This can only happen
if the creation of the OpenGL compositor takes longer than said 15 sec.
In the PostInit stage the timer gets deleted and the thread stopeed
again.
Thus if a freeze is detected the OpenGL unsafe protection is written into
the config. KWin aborts and gets restarted by DrKonqui. The new KWin
instance will no longer try to activate the freezing OpenGL as the
protection is set.
If KWin doesn't freeze the protection is removed from the config as
we are used to.
Check for freezes for the first n frames, not just the first
This patch changes the freeze detection code to detect freezes in the
first 30 frames (by default, users can change that with the
KWIN_MAX_FRAMES_TESTED environment variable). This detects
successfully the freezes associated to nouveau drivers
in https://bugzilla.suse.com/show_bug.cgi?id=1005323
Reviewers: davidedmundson, #plasma, #kwin, graesslin
Reviewed By: #plasma, #kwin, graesslin
Subscribers: luebking, graesslin, kwin, plasma-devel, davidedmundson
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D3132
Summary:
The TabBox performs the scrolling of the items by itself in order to
support wheel events even if the mouse is not on the TabBox. For that
KWin grabs pointer events on X11 (on Wayland an input filter is used)
and forwards them to the TabBox.
Qt uses Xinput2 for scrolling on the QQuickWindow. Due to that KWin
does not get any xcb core button press/release events when scrolling
inside the QQuickWindow and thus scrolling doesn't work.
There are three possible approaches to fix this:
1. Implement scrolling support in each of the QML switchers
2. Add an xinput2 filter to TabBox
3. Intercept the QWheelEvents on the QQuickWindow
The first approach has the disadvantage that all themes need
adjustment and that there might be behaviorial difference whether one
scrolls on the TabBox window or outside the window.
The second approach would be most in line with the other filters, but
is difficult due to the nature of xinput2 (no xcb bindings, etc).
Thus the third approach might be the best solution. Wheel events are
only delivered to the QQuickWindow if the native events were not already
intercepted, thus we know it won't have side effects for the case that
Wayland is used or xinput2 is not supported.
The implementation installs an event filter on the QQuickWindow which
gets created when showing the TabBox and inside the filter waits till
there is an angleDelta of +/-120 and scrolls by one per every 120 angle
delta as described in the QWheelEvent documentation.
BUG: 369661
FIXED-IN: 5.8.2
Test Plan: Scrolled with touchpad and mouse wheel.
Reviewers: #kwin, #plasma, broulik
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2953
Summary:
A shortcut with e.g. shift+w could not be triggered as shift is
considered as consumed. It transforms the keysym to an uppercase variant
thus it is consumed.
This change checks for the condition that shift is pressed and is the
only consumed modifier. If the current keysym is a letter the shift is
removed from the consumed modifier again to still support the shortcut.
BUG: 370341
FIXED-IN: 5.8.2
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3015
Summary:
Window tabs which are required for autogroup are currently not supported
in KWin. Thus exposing autogroup related window rules does not make any
sense.
This change hides the options again in the hope that we can bring the
feature back in future.
BUG: 370301
FIXED-IN: 5.8.2
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2996
Summary:
The Xkb implementation starts to track the state of the LEDs in the
keymap and emits a signal whenever the LEDs change. This signal is
connected to a method in LibInput::Connection which updates the led
state on all devices and uses it to init the state of the led when a new
device gets connected.
BUG: 369214
FIXED-IN: 5.8.2
Test Plan: Connected a keyboard with LEDs and enabled NumLock and ScrollLock.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2943
Summary:
The modifier-only-shortcuts break as soon as KWin grabs the keyboard
(e.g. alt+tab, present windows, etc.). The investigation shows that in
that case KWin does not get any raw key events any more and thus gets
confused about the state of the hold modifiers. E.g. alt+tab has the
alt key pressed, but we miss the release as the keyboard is grabbed.
This change addresses the problem by installing an additional event
filter for key press and release event which only filters for key events
on the root window. That way we can be sure that it only operates when
KWin grabbed the keyboard on the root window.
Note: the problem only exists when grabbing on the root window. If the
grab is on another window (e.g. moving a window) we still do get all
events.
The problem also seems to not happen if another application grabbed
keys on the root window. E.g. for key combinations grabbed by
kglobalaccel the correct sequence of key press/release as raw events
are reported. Also while the screen is locked the evemts are reported
and kscreenlocker grabs the keyboard on the root window.
Test Plan:
Used Alt+Tab and Present Windows and tried to activate launcher
afterwards.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2980
Summary:
KWin supports blocking global shortcuts when a window is active through
window specific rules. This change ensures that the modifier only
shortcuts also honor the blocking of global shortcuts. If global
shortcuts are disabled, they won't trigger any more.
BUG: 370146
FIXED-IN: 5.8.1
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2952
Summary:
If a key could be turned into a keysym with a modifier xkbcommon
considers the modifier as consumed even if not pressed.
E.g. Alt+F3 considers alt as consumed as there is a keysym gnerated with
Ctrl+Alt+F3 (vt switching).
This change tries to workaround the problem by ignoring the consumed
modifiers if there are more modifiers consumed than active. It's
possible that this will create regressions for other shortcuts - we need
to test it in the wild. Although this might cause regressions I'm aiming
for Plasma/5.8 branch with the change. It only affects Wayland and fixes
quite important shortcuts from window manager perspective (desktop
switching (ctrl+f1 to ctrl+f4), desktop grid (ctrl+f8), present windows
(ctrl+f9, ctrl+10), cube (ctrl+f11), user actions (alt+f3), close window
(alt+f4)). If it causes regressions they need to be fixed as well in the
Plasma/5.8 branch.
A new API entry point for xkbcommon was proposed, but is not yet merged
and there is no release with it yet. Once that is available the
workaround should get removed and replaced by the new API call.
BUG: 368989
FIXED-IN: 5.8.1
Test Plan: Going to restart session now with the change
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2945
Summary:
So far KWin tried to repeat all pressed keys which should repeat. But
this is not how X11 and e.g. QtWayland handle it. There only one key -
the last one which got pressed - repeats. And this makes sense as the
key is used to generate a keysym and that one KWin caches. Thus the
logic so far resulted in incorrect keysyms to be generated during the
repeat. E.g. pressing a, pressing b, releasing b would repeat b instead
of the hold a as b was the last generated keysym.
This change addresses this problem and let's only one key repeat at a
time. When the currently repeating key gets released the repeat timer is
stopped and other hold keys won't repeat any more. This also matches the
behavior of X11 and QtWayland.
BUG: 369091
FIXED-IN: 5.8.1
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2941
KWin supports disabling global shortcuts while a specific window is
active through window rules. This blocks global shortcuts but does not
block the modifier-only-shortcuts as the new test case shows.
CCBUG: 370146
Summary:
This change adds support for resizing outside the window decoration
(e.g. setting borders to NoSide or None).
To support this a new Toplevel::inputGeometry() -> QRect method is
added which exposes the geometry adjusted by the margins provided by
the decoration. This is checked in InputRedirection when finding a
Toplevel at a given position. The logic for figuring out whether the
event should go to the decoration or the window already handled the
situation correctly, so no further changes are needed.
BUG: 364607
FIXED-IN: 5.8.1
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2787
Summary:
The quit button in the DebugConsole is connected to deleteLater on the
DebugConsole. This is to clean up resources like the input event filter
which is rather expensive to have running.
When closed through the window decoration the DebugConsole window only
got hidden but not destroyed. Resulting in the input filter to continue
processing.
This change ensures that the DebugConsole gets properly destroyed once
the window gets hidden.
BUG: 369858
FIXED-IN: 5.8.1
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2931
This adds a new test case for global shortcuts which simulates
triggering a shortcut through key repeat. The test verifies a problem
that the the shortcut continues to be triggered after releasing the key
if another key is still pressed (and triggers repeats).
CCBUG: 369091
This test simulates closing the DebugConsole through the window
decoration. Which unlike the dedicated button does not destroy the
DebugConsole.
CCBUG: 369858
Summary:
The activities combobox content is loaded asynchronously,
we are storing the configured value for the window rule
until the activity list is loaded into the combo box.
And then, we set that item as the current one in the combo.
Reviewers: #kwin, mart
Reviewed By: mart
Subscribers: luebking, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2851
Summary:
The PanelBehavior was incorrectly mapped to hasStrut resulting in too
many modes creating a strut for the panel.
CCBUG: 368499
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2788
Summary:
My compiler doesn't seem to like this constructor, it bails out with the
following error:
/home/sebas/kf5/src/kde/workspace/kwin/autotests/integration/globalshortcuts_test.cpp:
In member function ‘void GlobalShortcutsTest::testConsumedShift()’:
/home/sebas/kf5/src/kde/workspace/kwin/autotests/integration/globalshortcuts_test.cpp:79:40:
error: no matching function for call to ‘QAction::QAction()’
QScopedPointer<QAction> action(new QAction);
^~~~~~~
Using this as first argument fixes the build on my machine.
Test Plan: screenedges test fails, others pass. (this screenedges test failure seems unrelated)
Reviewers: graesslin
Reviewed By: graesslin
Subscribers: luebking, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2782
So far this method translated the keysym to Qt::Key. This is no longer
needed as the only method which invokes processKey has access to the
translated key. Thus saving one translation for every key press.
Reviewed-By: bshah
A new protected method is added to InputEventFilter to forward a
QKeyEvent to the Wayland server. Several input filters need to forward
the event to have a proper state of the events. E.g. the TabBox filter,
but also the internal window filter and effects filter. It's important
to update all events even if the events are not forwarded to a surface.
This new method takes care of the general handling like ignoring key
repeats, etc.
Reviewed-By: bshah
l10n daemon script
Martin Gräßlin
James Pike
Antonio Larrosa
Jonathan Riddell
Rohan Garg
Ivan Čukić
Tobias C. Berner
Sebastian Kügler