Summary:
The code in events.cpp was problematic as it was called in a Wayland
session. So KWin changed outputs, this gets mirrored to XWayland and
then KWin reacted on the XRandR event and might have even changed the
refresh rate due to that - bad idea.
This change moves the code into the already existing X11EventFilter for
XRandR events in XRandRScreens.
Test Plan: Run kwin_x11 in gdb on Xephyr, breakpoint in new code and triggered XRandR event
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7654
Summary:
The feature has always been considered experimental. Unfortunately it is
completely unmaintained and hasn't seen any commits in years. It
requires kolor-manager to function, but that has not seen a release
based on frameworks yet. This makes it difficult to maintain. In fact I
have never been able from the introduction till now to setup a color
corrected system. One needs kolor-manager and oyranos and especially the
latter is hardly available on any linux distribution (e.g. not on the
Debian/Ubuntu systems).
Due to being unmaintained color correction in KWin did not keep up with
recent changes. Neither did it see any updates during the xlib->xcb
port, nor during the Wayland port. Especially the Wayland port with the
rendering changes make it unlikely to function correctly. E.g. Wayland
introduced a proper per-screen rendering, while color correction did a
"fake" per screen rendering. How that is going to work in combination is
something nobody ever tried. Now after the introduction of proper
per-screen rendering the solution would be to port color correction to
the new api, but that never happened.
Color correction also modified the shaders, but a newer shader API got
introduced some time ago. Whether the color correction shader support
that or not, is unknown to me. Also which shader language versions are
supported. I know it was based on 3d texture support, which back on
introduction was partially lacking in OpenGL ES. Nowadays that changed,
but color correction didn't update.
Last but not least it is completely X11 based and there is no work on
how to make it work with Wayland.
Given all the problems, especially the fact that it is unmaintained and
cannot be setup on my system, means to me that the only solution is to
remove it.
I'm open to having it reintroduced in future, but only if the
availability on Linux distributions gets addressed before. As long as
major linux distributions do not ship this feature, it should not be in
KWin. Given that I must say that it was a mistake to add it in the first
place and I need to point out that I was against the merge back then.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3402
Summary:
From feedback we got it seems that not all users agree to games and
other applications blocking compositing. Some users prefer to have
compositing always on even if this gives a small performance penelity.
This change introduces a dedicated config option to specify whether games
are allowed to block compositing. By default this option is enabled.
The setting can be overwritten with a window specific rule. So usecases
like all windows except this very specific one are supported.
In the user interface the config option is shown where previously the
unredirect fullscreen option was shown.
Test Plan:
Run a game which should block compositing, verified it blocks.
Changed the setting, run the game again, verified it doesn't block. And
once more for with allowing to block.
Reviewers: #kwin, #plasma_on_wayland, #vdg
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2584
Summary:
Rational: unredirect fullscreen windows is a weird beast. It's intended
to make fullscreen windows "faster" by not compositing that screen. But
that doesn't really work as KWin jumps out of that condition pretty
quickly. E.g. whenever a tooltip window is shown. KWin itself has a
better functionality by supporting to block compositing completely.
The complete code was full of hacks around it to try to ensure that
things don't break.
Overall unredirect fullscreen has always been the odd one. We had it
because a compositor needs to have it, but it never got truly integrated.
E.g. effects don't interact with it properly so that some things randomly
work, others don't. Will it trigger the screenedge, probably yes, but
will it show the highlight: properly no.
By removing the functionality we finally acknowledge that this mode is
not maintained and has not been maintained for years and that we do not
intend to support it better in future. Over the years we tried to make
it more and more hidden: it's disabled for Intel GPUs, because it used
to crash KWin. It's marked as an "expert" option, etc.
It's clearly something we tried to hide from the user that it exists.
For Wayland the whole unredirect infrastructure doesn't make sense
either. There is no such thing as "unredirecting". We might make use
of passing buffers directly to the underlying stack, but that will be
done automatically when we know it can be done, not by some magic is
this a window of specific size.
Test Plan:
Compiles, cannot really test as I am an Intel user who never
had that working.
Reviewers: #kwin, #plasma, #vdg
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2180
Summary:
This change reduces the windowing system specific code pathes. Instead
of checking whether we are on X11 or Wayland to decide whether
compositing is required, we just ask the Platform.
The default is true, only x11 standalone allows to not require
compositing.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1575
This change implements the mouse command for modifier (alt/meta) plus
click in InputRedirection so that it also works on Wayland.
Modifier plus mouse wheel is not implemented yet.
For easier code in Options a new method is added which provides the
configured modifier as a Qt::KeyboardModifier instead of a Qt::Key code.
Test case is added which simulates all variants of modifiers plus
supported mouse buttons to trigger move.
On popular demand!
This change tracks how modifiers are used and detects a modifier only
key press/release. That is:
* no other key is pressed when the modifier gets pressed
* no other key gets pressed before the modifier gets released
If such a press/release is detected, we call a configurable dbus call.
The possible shortcuts can be configured in kwinrc, group
"ModifierOnlyShortcuts". The following keys are supported:
* Shift
* Control
* Alt
* Meta
As value it takes a QStringList (comma seperated string) with
service,path,interface,method,additionalargs
E.g. to invoke Desktop Grid effect on Meta key:
[ModifierOnlyShortcuts]
Meta=org.kde.kglobalaccel,/component/kwin/,org.kde.kglobalaccel.Component,invokeShortcut,ShowDesktopGrid
I do not intend to add a config interface for it. Let's keep it a hidden
way.
REVIEW: 124954
Each of the backends becomes a plugin. This allows kwin_wayland to load
the requested plugin and kwin itself doesn't need to link all the
libraries needed. E.g. libdrm is no longer linked if running kwin_x11.
Also this allows to create backends for the non-standard EGL platforms
(examples could be raspberrypi or Android devices).
A new config option "GLPlatformInterface" is added to the Compositing
settings group. Valid values are "glx" and "egl". This config option is
honored by the Scene to decide which backend to create.
The setting gets sanitized by the operation mode (egl for Wayland),
the environment variable KWIN_OPENGL_INTERFACE and the compile time
support. These switches are removed from the Scene to not have them
duplicated.
KWin already has a de facto OpenGL 2 dependency through QML. Combined
with the fact that the OpenGL 1 backend is basically unmaintained and
also unused, it's better to remove it for the new major release.
This change includes:
* Removal of cmake option KWIN_BUILD_OPENGL_1_COMPOSITING
* Removal of KWIN_HAVE_OPENGL_1 compile option and all code
ifdef'ed with it (partially removal of if-else constructs)
* Removal of CompositingType::OpenGL1Compositing (flags are kept
as a core flag should get introduced)
* Driver recommendation for OpenGL1Compositing changed to XRender
(should be evaluated whether the drivers can provide GL2)
* Removal of configuration option "GLLegacy"
* Removal of fooMatrix function in kwinglutils
* Removal of ARBBlurShader
* Removal of legacy code path in GLVertexBuffer
* Removal of GLShaderManager::disable
* if-blocks with ShaderManager::instance()->isValid() removed
REVIEW: 116042
In the Wayland world we need to have a compositor. This means we have to
enforce that the compositor is running. If the setup fails we have to
quit, because it doesn't make any sense any more to be running.
A new method requiresCompositing() is added to the Application. If it
returns true the useCompositing option will always return true and the
unredirect fullscreen option will always return false. That way
compositing is enforced at startup and cannot end by unredirecting.
In addition this method is checked if actions are performed which would
suspend compositing. E.g. the shortcut to toggle compositing. Restarting
the compositor is still possible in order to change the selected
compositing backend without a restart. But if it fails KWin will quit.
The main purpose of the opengl testapp was to set the environment
variable LIBGL_ALWAYS_INDIRECT if direct rendering is not supported
before glx gets initialized.
With Qt5 we may no longer set this environment variable. QtQuick
requires direct rendering. On IvyBridge QtQuick is crashing if the
variable is set. Thus we are no longer allowed to set it and thus the
complete test becomes pointless.
The test app basically whitelisted most drivers anyway, the only
drivers which were problematic are the proprietary Catalyst drivers.
It that's still a problem we can also disable OpenGL compositing on
those drivers through the recommendation in the GLPlatform.
This also means that the KWIN_DIRECT_GL variable is no longer useful.
The configChanged() signal was declared in both KDecorationOptions and
Options, while Options recently became derived from KDecorationOptions.
This created confusion for QMetaObjectPrivate which was spitting a
couple of error messages.
Remove configChanged() signal declaration from Options, rely on the one
from the base class Options.
Create a special notify signal for focusPolicyIsResonableChanged,
directly connected to the configChanged() signal.
REVIEW: 113336
For this KDecorationOptions becomes a QObject. The changed flags from
updateSettings are removed. Instead the method just emits the proper
changed signals.
This should allow better handling in the Factories.
The changed mask is going to be replaced by more specific signals so
we don't need to calculate the change mask in KWin core anymore.
We still need to call reset in the decoration plugin to check whether
a new decoration library needs to be loaded.
Used to include quite a bit no longer needed. In order to get rid of
the utils.h inclusion one enum is moved to options (where it actually
belongs to).
Following the approaches of other split out functionality Screens is a
singleton class created by Workspace.
The class takes over the responsibility for:
* screenChanged signal delayed by timer
* number of screens
* geometry of given screen
* active screen
* config option for active screen follows mouse
The class contains a small abstraction layer and has a concrete subclass
wrapping around QDesktopWidget, but the idea is to go more low level and
interact with XRandR directly to get more detailed information.
All over KWin the usage from QDesktopWidget is ported over to the new
Screens class.
REVIEW: 109839
either by
- forcing fullrepaints unconditionally
- turning a repaint to a full one beyond a threshhold
- completing the the backbuffer from the frontbuffer after the paint
BUG: 307965
FIXED-IN: 4.10
REVIEW: 107198
The new class FocusChain manages two different kind of focus chains.
First of all there is a most recently used focus chain which is primarily
used for TabBox.
Then there is one focus chain per virtual desktop. These chains are used
to determine which Client needs to be activated when e.g. switching to a
virtual desktop.
The individual chains are implemented as a simple QList of Client* with
the most recently used Client as the last element. That way one can see
it as a LIFO like structure.
The desktop focus chains are internally represented as a hash with the id
of the virtual desktop as the key and a list as described as the value.
FocusChain is a singleton which provides some methods to manipulate the
chains and to get a specific Client for a task (e.g. TabBox).
While splitting out the code some unused code inside TabBox got removed
as well as some activities related code (windows cannot be moved while
switching activities).
REVIEW: 107494
For the time being the current design of Options is more or less kept to
not have to adjust KWin code all over the place. Also for some parts the
generated class from KConfigXT cannot be used due to inter-settings
dependencies defined in the setters.
Options now holds a pointer to a Settings object which is generated from
KConfigXT and uses it to read the default values and the individual
settings. This means the static default value methods are dropped and the
variables are initialized with a normal default value (all int 0, all
boolean false and so on) in the initializer list. Afterwards the values
are set to the correct default value through KConfigXT.
So far for the first step only Windows category is using KConfigXT.
REVIEW: 108572
This rewrite is mostly motivated by the need to handle multi screen
setups correctly. That is have edges per screen and not for the combined
geometry. Also porting from XLib to XCB has been a motivation for the
rewrite.
The design of the new ScreenEdge handling is described in the
documentation of ScreenEdges in screenedge.h.
In addition the following changes have been performed:
* move configuration from Options to ScreenEdge
* add screen edge information to Workspace::supportInformation (obviously
replaces what had been read from Options)
* have Workspace hold a pointer to ScreenEdges instead of an object
* forward declaration of ScreenEdges in workspaces.h, this explains the
seemingly unrelated changes of just another include in some files
BUG: 290887
FIXED-IN: 4.11
Checks are now performed for GL errors and in case of errors everything
is aborted. The error handling mechanism introduced for this purpose
somewhat improves the color correction code.
Fix gl invalid operation in color correction, when first setting up the
lookup texture uniform.
REVIEW: 107754
The ownership for virtual desktops is moved from Workspace into a new
VirtualDesktopManager. The manager is responsible for providing the count
of virtual desktops and keeping track of the currently used virtual
desktop.
All methods related to moving between desktops are also moved from
Workspace to the new manager, though all methods related to Clients on
Virtual Desktops remain in Workspace for the time being. This is to have
the new manager as independent from KWin core as possible.
An rather important change for the handling of virtual desktops is that
the count and the id of a desktop is now an unsinged integer instead of
an integer. The reason for that is that we cannot have a negative count
of desktops as well as it is not possible to be on a desktop with a
negative identifier.
In that regard it is important to remember that a Client can be on a
desktop with a negative identifier. The special value for a Client being
on all desktops is handled by using -1 as a desktop. For the time being
this is not adjusted but instead of comparing the virtual desktop ids one
should prefer to use the convenient methods like isOnDesktop and
isOnAllDesktops. This would allow in future to internally change the
representation for on all desktops.
Add an option to kcmcompositing in the 'Advanced' tab, to enable or
disable color correction. It is specified that it's experimental and it
needs Kolor Manager.
Before painting for a particular screen, ColorCorrection::setupForOutput
should be called.
A screen property is added for WindowPaintData.
In kwinglutils, The fragment shaders are intercepted before being
compiled and they get a couple of lines of code inserted in order to do
the color correction. This happens only when color correction is enabled, of
course.
For D-Bus communication with KolorServer, everything is async.
The implementation basically manages a set of color lookup tables for
different outputs and for different window regions. These are taken via
D-Bus. Each lookup table has around 700 KB.
This commit reintroduces the changes from the former merge with the
"color2" branch. In this form, it can be easily reverted.
REVIEW: 106141
This merge is incomplete and it does not include the review number of
the associated review request. It should have been pushed as a single
commit, because the merged commits were not intended to be published in
their form.
This reverts commit dcba90263069a221a5489b1915c5cf1ca39d090c, reversing
changes made to 50ae07525c7fde07794e7548c3d6e5a69cb1a89d.
Conflicts:
kwin/scene_opengl.cpp
kwin/scene_opengl.h
SceneOpenGL turns into an abstract class with two concrete subclasses:
* SceneOpenGL1
* SceneOpenGL2
It provides a factory method which first creates either the GLX or EGL
backend which is passed to a static supported() method in the concrete
sub classes. These method can test whether the backend is sufficient to
be used for the OpenGL version in question. E.g. the OpenGL 2 scene
checks whether the context is direct.
The actual rendering is moved into the subclasses with specific OpenGL 1
and OpenGL 2 code. This should make the code more readable and requires
less checks whether a Shader is bound. This is now known through the
Scene: the OpenGL1 scene will never have a shader bound, the OpenGL2 scene
will always have a shader bound.
To make this more reliable the ShaderManager is extended by a disable
method used by SceneOpenGL1 to ensure that the ShaderManager will never
be used. This also obsoletes the need to read the KWin configuration
whether legacy GL is enabled. The check is moved into the supported
method of the OpenGL2 scene.
REVIEW: 106357
The implementation consists of a class in libkwineffects.
There are some slight modifications in the compositor. Regions for
different outputs are drawn at different times.
Currently only per output color correction is implemented. However, the
grounds are prepared for implementing per window color correction
easily.
The ColorCorrection class needs to communicate via D-Bus with a KDED
module, KolorServer, which is a part of KolorManager.
The only visible part for the user consists of a check box in the
advanced tab for the compositing KCM.
The actual correction is done by injecting a piece of code in the
fragment shader, code that does a 3D lookup into a special color lookup
texture. The data for these textures is obtained from KolorServer. All
D-Bus calls are async.
As discussed on the mailinglist [1] the tiling support is
removed from KWin. The main reasons for this step are:
* it is unmaintained
* it is a mode not used by any of the core KWin team
* original developer said at Akademy 2012 that he is not
interested in picking up the work again
* tiling has quite some bugs, e.g. multi screen not supported
* is conflicting with other concepts in KWin, e.g. activities
There is ongoing work to get tiling supported through a KWin
script, which is a preferred way as it does not influence the
existing C++ code base.
[1] http://lists.kde.org/?l=kwin&m=133149673110558&w=2
BUG: 303090
FIXED-IN: 4.10
REVIEW: 105546
Strict binding follows the driver (GLPlattform) unless
the user has a config value specified in the kwinrc.
For this a new property is added to Options to indicate
whether strict binding is user defined or follows the
driver. In case of driver the strict binding option is
set when OpenGL compositor starts up.
Options loading is split into three parts:
* reparse configuration
* loading of non-compositing related options
* loading of composited related options not needing CompositingPrefs
At startup the reparsing of configuration is done through a Thread
to gain a little bit of less waiting.
Before something else accesses the KConfig for the first time we
wait for the thread to finish and perform the other two loading
operations of Options.
The settings depending on CompositingPrefs will only be invoked
if a compositor is going to be needed.
REVIEW: 104562
Use setter when changing a value to ensure that signal gets emitted
and the option dependencies are applied.
Also use the default values as provided by the static getters.
REVIEW: 104561
Yuri Chornoivan
Martin Flöser
Thomas Lübking
Casian Andrei
Fredrik Höglund
Ralf Jung